Invisible Oak Engineered Wood Flooring Installation

Before the works...

In this Northwest London Property we installed approx. 15 sqm sqm of laminate flooring. During our initial survey, we did a thorough inspection of the floors and discussed with the client all possible options.

Our client has decided to go for floor fitting, subfloor preparation, beading installation, and install Timberlay Engineered Oak Flooring, Invisible, Lacquered, Rustic 190x4x20 Mm with matching the floor scotia beading around perimeter.

How we made it happen...

After our floor installers have checked all service, property & products details on site, including amount of products supply, they started with lifting existing laminate flooring and its preparation for disposal to our waste facility.

During this flooring project we fitted 15 sqm of laminate flooring - Timberlay Engineered Oak Flooring, Invisible, Lacquered, Rustic 190x4x20 Mm with floating installation over original floorboards onto Duralay Excel Silver 3.7 mm underlay with DPM barrier .

LVT flooring product is very thin and requires an excellent subfloor level. Our luxury vinyl floor (LVT) fitting service will make sure we comply with appropriate level for this product.

in this project we laid 15 sqm sqm of laminate flooring - Timberlay Engineered Oak Flooring, Invisible, Lacquered, Rustic 190x4x20 Mm with floating installation over original floorboards onto Duralay Excel Silver 3.7 mm underlay with DPM barrier .

Laminate flooring products are relatively thin and require a good subfloor level. Our laminate floor installation service will consider this from initial survey and during the laying itself.

When laying new floors an expansion gap of approx. 10 mm is left on the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.

In this project the client decided to go with matching the floor scotia beading around the perimeter.

As per our initial assessment, the subfloor was prepared with 12 mm GP plywood before the floor works.

Due to the change of level, after the new flooring was installed - our experienced, local Northwest London floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.

Overall the project was completed as originally planned and to the satisfaction of the client.

Find out more about the product laid on this project...

---

Timberlay Engineered Oak Flooring, Lacquered, 190x4x20 Mm