Before the works...

In this Richmond house we fitted approx. 27 sqm of oak parquet flooring. During our obligation-free survey, we did detailed inspection of the floors and discussed with the client all possible options.

Our client has decided to go for floor fitting, beading installation, and install Timbercraft Oak Parquet Flooring, Prime, Unfinished, 70x280 Mm with around perimeter.

How we made it happen...

After our floor installers have checked all service, property & products details on site, including amount of products supply, they started with lifting existing parquet flooring and its preparation for disposal to our waste facility.

During this flooring project we fitted 27 sqm of parquet flooring, specifically - Timbercraft Oak Parquet Flooring, Prime, Unfinished, 70x280 Mm with glue-down installation in herringbone pattern (wall-to-wall), over concrete subfloors.

Parquet flooring installation requires many years of experience, skills and the right carpentry tools. Depending on the overall condition of the subfloor, our initial assessment identifies if sepcific subfloor preparation will be required.

When installing new floors an expansion gap of approx. 10 mm must be left around the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.

In this project the client decided to go with around the perimeter.

As per our initial assessment, the subfloor was prepared with smoothing compound before the floor installation.

Due to the change of level, after the new flooring was installed - our experienced, local Richmond floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.

Overall the project was completed as originally planned and to the delight of the client.

Find out more about the product laid on this project...

---

Timbercraft Oak Parquet Flooring, Prime, Unfinished, 70x22x280 Mm