Before the works...

In this Bloomsbury flat we laid approx. 34 sqm sqm of oak engineered wood flooring. During our obligation-free survey, we did a thorough inspection of the floors and discussed with the client all possible options.

Our client has decided to go for floor fitting, beading installation, and install Timberlay Engineered Oak Flooring, Handscraped, Golden Lacquered, 190x4x20 Mm with solid white scotia beading around perimeter.

How the fitting of the floors went...

One of the challenges we faced on this project is to complete the floor works in stages, due to furniture, which could not be moved out.

After our floor installers have checked all service, property & products details on site, including amount of products supply, they started with lifting existing hardwood flooring and its preparation for disposal to our waste facility.

During this flooring project we installed 34 sqm of engineered wood flooring, specifically - Timberlay Engineered Oak Flooring, Handscraped, Golden Lacquered, 190x4x20 Mm with floating installation, over plied timber subfloor onto Duralay Silentfloor Gold 4.5 mm underlay with DPM barrier .

When laying new floors an expansion gap of approx. 10 mm must be left on the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.

In this project the client decided to go with solid white scotia beading around the perimeter.

As per our initial assessment, the subfloor was prepared with 18 mm GP plywood before the floor works.

Due to the change of level, after the new flooring was installed - our experienced, local Bloomsbury floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.

Overall the project was completed as originally planned and to the satisfaction of the client.

Find out more about the product laid on this project...

---

Timberlay Engineered Oak Flooring, Handscraped, Golden Lacquered, 190x6x20 Mm