Installation of Timberlay Engineered Oak Wood Flooring, Lacquered, 150x18 Mm

Before the works...

In this Clapton flat we fitted approx. 44 sqm of oak engineered wood flooring. During our initial survey, we did detailed inspection of the floors and discussed with the client all possible options.

Our client has decided to go for floor fitting, beading installation, and install Timberlay Engineered Oak Wood Flooring, Lacquered, 150x18 Mm with solid white scotia beading around perimeter.

How we completed the floor works...

One of the challenges we faced on this project is to complete the floor works in stages, due to furniture, which could not be moved out.

After our floor installers have checked all service, property & products details on site, including amount of products supply, they started with lifting existing carpet & laminate flooring and its preparation for disposal to our waste facility.

In this project we fitted 44 of engineered wood flooring, specifically - Timberlay Engineered Oak Wood Flooring, Lacquered, 150x18 Mm with floating installation, over timber subfloor (chipboard) onto Duralay Silentfloor Gold 4.5 mm underlay with DPM barrier .

When installing new floors an expansion gap of approx. 10 mm is left on the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.

In this project the client decided to go with solid white scotia beading around the perimeter.

Due to the change of level, after the new flooring was installed - our experienced, local Clapton floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.

Overall the project was completed as planned and to the satisfaction of the client.