Before the works...

In this Edgware home we fitted approx. 24 of oak laminate flooring. During our initial survey, we did detailed inspection of the floors and discussed with the client all possible options.

Our client has decided to go for floor fitting, beading installation, and install QuickStep Classic Toasted Oak Laminate Flooring with solid white scotia beading around perimeter.

How we made it happen...

After our floor installers have checked all service, property & products details on site, including amount of products supply, they started with lifting existing and its preparation for disposal to our waste facility.

In this flooring project we installed 24 sqm of laminate flooring - QuickStep Classic Toasted Oak Laminate Flooring with floating installation over original floorboards onto Duralay Silentfloor Gold 4.5 mm underlay with DPM barrier .

Laminate flooring products are relatively thin and require a good , levelled base. Our laminate floor installation service will consider this from initial survey and during the installation itself.

When installing new floors an expansion gap of approx. 10 mm is left on the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.

In this project the client decided to go with solid white scotia beading around the perimeter.

Due to the change of level, after the new flooring was installed - our experienced, local Edgware floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.

Overall the project was completed as scheduled and to the satisfaction of the client.

Find out more about the product laid on this project...

---

QuickStep Classic Toasted Oak Laminate Flooring