Engineered Oak Wood Flooring & Beading Installation

Before the works...

In this Croydon Property we installed approx. 24 sqm of oak engineered wood flooring. During our initial survey, we did a thorough inspection of the floors and discussed with the client all possible options.

Our client has decided to go for floor fitting, beading installation, and install Timberlay Engineered Oak Wood Flooring, Lacquered with solid white scotia beading around perimeter.

How the floor installation was completed...

After our floor installers have checked all service, property & products details on site, including amount of products supply, they started with lifting existing and its preparation for disposal to our waste facility.

In this flooring project we installed 24 of engineered wood flooring, specifically - Timberlay Engineered Oak Wood Flooring, Lacquered with floating installation, over original floorboards onto Duralay Excel Silver 3.7 mm underlay with DPM barrier .

When laying new floors an expansion gap of approx. 10 mm is left around the perimeter. This gap is either covered by new skirting boards, or in case the old ones remain - scotia or quadrant beading will be installed around the perimeter.

In this project the client decided to go with solid white scotia beading around the perimeter.

As per our initial assessment, the subfloor was prepared with 12 mm GP plywood before the floor works.

Due to the change of level, after the new flooring was installed - our experienced, local Croydon floor fitters made sure all affected doors & door frames are trimmed to height and adjusted to new flooring.

Overall the project was completed as planned and to the delight of the client.